Sleep Mode; Putting Your Computer To Sleep; Waking Your Computer; Adjusting Your Computer Sleep Setting - HP Compaq Presario,Presario 5000 User Manual

Sleep Mode

You can put your computer
into Sleep mode whenever
you want.
Sleep mode is a low-power
standby state that reduces
the amount of electrical
power consumed by your
computer while you are not
actively using it.
Once your computer enters
Sleep mode, you must wake
it again to use your
software.
Your computer uses
Microsoft Windows
Power Management to put
itself into Sleep mode
automatically after it has
been idle for a while. You
can specify the amount of
time before an idle
computer enters Sleep
mode.
5-2 S E
AVING NERGY
Sleep Mode

Putting Your Computer to Sleep

1. Save all your work and exit all programs.
E
2. Press the Sleep
3. Or, click the Start button on the Windows desktop, select
Shut Down, then Standby, and then click OK.
4. The amber Sleep LED above the numeric keypad lights up,
indicating that the computer is in Sleep mode.

Waking Your Computer

E
Press the Sleep button on the keyboard, press any key on the
keyboard, or move the mouse. The amber Sleep LED stops
glowing, indicating that the system is active.

Adjusting Your Computer Sleep Setting

1. From the Windows
desktop, click the Start
button, point to Settings,
and then click Control
Panel. The Control Panel
window is displayed.
2. Double-click the Power
:
Management
The Power Management
Properties window is
displayed.
3. On the Power Schemes
tab, click the drop-down
arrow next to the System standby box 1, and select a time.
4. Click Apply 2, and then click OK 3.
button on the keyboard.
icon.
M P —L M
Y RESARIO EARNING ORE