Printing Covers And Cd Labels - HP Compaq Presario,Presario 5000 User Manual

What is Jewel
Case Creator?
(continued)
The following topics
describe the types of paper
to use, aligning the text
with forms, selecting paper
types, and printing covers
and labels.
Jewel Case Creator
includes a list of paper
types in which the
positioning of the cover and
label pages is already
determined for the selected
cover and label stock paper
types.
For best results, Adaptec
recommends that you use a
CD label applicator to
apply labels to CDs and
follow the manufacturer's
instructions (CD label
applicator and labels are
sold separately).
M P —L M
Y RESARIO EARNING

Printing Covers and CD Labels

Using Standard Cover and Label Stock
For best results, you can use standard cover and label stock to
print your covers and labels. Standard cover and label stock is
available at many office supply and computer retail stores.
Jewel Case Creator has already measured and determined the
print positions for a variety of cover and label stocks so that
your covers and labels are correctly aligned on the particular
stock. The predefined paper stocks are listed in the Page setup
dialog box in the Current paper type drop-down list box.
If the stock you are using is not displayed in the paper type lists,
you can determine the correct position by aligning the printed
text with forms.
Aligning the Printed Text with Forms
For best results, you can make a photocopy of a preformatted
cover or label stock, then print the desired page onto the
photocopy to check the alignment. To modify the alignment,
there are two options you can use:
Set Printed Location: to modify where the cover or label is
➜
printed on the page. This adjustment is on a cover/label
basis and is useful for setting up the print locations for new
cover or label stock that is not displayed in the Current
Paper Type drop-down list box in the Page Setup dialog box.
Printer Adjustment: to shift the paper placement for a
➜
particular printer and correct for slight variances among
printers. This adjustment is on a per-printer basis and is
useful for cover or label stock that is displayed in the
Current Paper Type drop-down list box but the alignment is
slightly off.
Repeat and adjust accordingly until the proper alignment is
achieved before printing onto actual cover or label stock.
ORE
C Y O CD
REATING OUR WN S
4-35