Plug In And Go; Setting Up Your Computer - HP Compaq Presario,Presario 5000 User Manual

Plug In and Go!

If a cable is disconnected or
you move your computer to
another location, this topic
helps you to set up again
quickly.
Tip
It's important to purchase a
surge protector to protect your
computer from electrical
spikes and power surges.
See also ...
The Quick Setup poster that
came with your computer is a
visual guide to setting up your
computer.
Tip
If you have home networking,
refer to the home networking
documentation for
instructions on how to connect
your phone lines.
M P —L M
Y RESARIO EARNING
Plug In and Go!

Setting Up Your Computer

Note: Do not set up the printer until your computer is set up and you have
registered your computer with Compaq.
1. Connect the monitor
according to the
color-coding, icons, and the
instructions from the
monitor manufacturer.
2. Connect the speaker cable
and microphone cable (if
applicable).
3. Connect the power cable.
4. Connect the keyboard to the
rear USB port and the
mouse to the PS2 port.
5. Connect the telephone cable
between the Modem Line In
port and the wall outlet.
6. Plug the monitor and
computer power cables into
the wall outlet or surge
protector.
7. Turn on the monitor and
press the Power On 1
button to turn on your
computer.
Note: If you are setting up your computer for the first time, follow the
on-screen instructions to register both your operating system and your
computer. The next topic discusses the registration process.
ORE
~
F I Y
EATURES NSIDE OUR
C 2-7
OMPUTER