User Backup - HP Compaq Presario,Presario 5000 User Manual

QuickRestore
(Continued)
The User Backup backs up
all of the information and
files on your hard drive and
stores them in a separate
partition on your drive for
later use. Complete a User
Backup to protect your
personal files and data.
M P —L M
Y RESARIO EARNING
4. The Selective Restore menu is displayed. From the Selective
Restore menu, you can choose from several drivers or
applications. Click the icon representing the application or
driver you want to reinstall.
5. A message is displayed asking if you want to restore the
software. Click Yes to continue. QuickRestore then restores
the driver you selected.
6. You will be prompted to restart your computer. Save all open
files and close all applications.
7. Restart your computer by clicking Start, Shutdown, and
Restart. Click OK.
8. Repeat this procedure to reinstall as many drivers or
applications as you need.

User Backup

1. From the Windows desktop, double-click the Compaq
Support icon.
2. Click the QuickRestore icon. The QuickRestore main menu
is displayed.
3. Place your cursor over the User Backup icon. If you see a
message that says User Backup cannot be performed on this
machine, call Compaq Technical Support at the telephone
number listed on your warranty documentation. Otherwise,
proceed to the next step.
4. Click the Continue button.
5. A message is displayed asking if you want to copy the data to
the D: drive. Click Yes to continue. The system saves your
files to the D: partition and then restarts automatically.
IMPORTANT: You may be notified that your backup device is not large
enough to complete User Backup. You can increase the partition size unless
your hard drive is completely full. See the following section to increase the
size of the User Backup partition.
ORE
P M 9-13
REVENTIVE AINTENANCE