Creating an
Audio CD
(continued)
M
P
—L
M
Y
RESARIO
EARNING
Advanced Settings Within Audio CD
The following options are available when you click the
Advanced button (within the CD Creation Setup window).
Create Options
Test Only: Select this option to perform a real test in which
➜
the files to be recorded are passed to the CD-RW. No actual
information is recorded to the CD. Use this option if you
have made any changes to your CD-RW setup.
Test and Create CD: Select this option to perform a test in
➜
which the files to be recorded are passed to the CD-RW. No
actual information is recorded to the CD. Recording begins
after a successful test. Each time you create the CD and you
do not want to perform the test, select Create CD below.
Create CD: Select this option when you do not want to
➜
perform the test. This option begins the recording process
immediately.
Write CD-Text Info: Select this option if you want to
➜
include CD-Text information, such as CD title, artist, and
track titles on the CD. This information can then be
displayed on consumer electronic devices that support CD-
Text information. This option is available only when you
write in Disc-at-Once mode and if your CD-RW supports
CD-Text information.
Write Options
Track-at-Once: Tracks recorded in Track-at-Once mode are
➜
separated by gaps. If a data track is followed by an audio
track, the gap is two or three seconds. The gap between
audio tracks is usually two seconds.
Leave Session Open: Select this option to add more songs
➜
to the CD at a later time. By keeping the session open, you
can record additional songs to the first session at different
times. When you have added all the songs you want to the
CD and you want to listen to it on a home or a car stereo CD
player, you must close the session. (This is the default
option.)
ORE
C
Y
O
CD
REATING
OUR
WN
S
4-9