Download Print this page

GYROZEN 1536 Quick Manual

Microcentrifuge
Hide thumbs Also See for 1536:

Advertisement

Quick Links

Quick Guide
Display & Control Panel
Status of
ACC, Running, DEC, Lid Open / Close,
Sound, Key Lock, Warning, Backlight Off
Set Value
Set Value
Actual Value
Set Value
Operation
Function Selection
Touch a parameter
to be changed
Setting Speed
Setting Time
Touch once : RPM
To 99 min. 59 sec. or
Continuous (00:00)
Touch twice : RCF
Setting ACC / DEC
ACC (1 ~ 9 / Max. 9)
DEC (0 ~ 9 / Natural DEC 0)
Parameter Change
Touch the numeric keys to change
the input value and touch enter key to save
Microcentrifuge
At Set Speed
Keep touching 1 key for 3 seconds
On : Counts the time at set speed
Off : Counts the time from starting
Short Spin
Start/Stop
Lid Open
Program SAVE / CALL
Touch once : CALL / Touch twice : SAVE (up to 100)
Touch continuous : Lock / Unlock
PROG Save / Call
Touch once : CALL
Touch twice : SAVE
Touch the numeric keys for
the program number and
enter key to save or call
1536
End Alarm (Sound Volume)
Keep touching 2 key for 3 seconds
End Alarm (Repeat Time)
Keep touching 3 key for 3 seconds
Cat. No. GZ-1536
Start / Stop
Touch start / stop

Advertisement

loading
Need help?

Need help?

Do you have a question about the 1536 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for GYROZEN 1536

  • Page 1 Touch once : CALL / Touch twice : SAVE (up to 100) Operation DEC (0 ~ 9 / Natural DEC 0) Touch continuous : Lock / Unlock Cat. No. GZ-1536 Function Selection Parameter Change PROG Save / Call Start / Stop...
  • Page 2 Switch Interchangeable rotors permitted within the area during operation. off the device and disconnect the power plug after using the centrifuge. Download corresponding user manual from www.gyrozen.com Order & Inquiry : +82-2-3452-7736 / info@gyrozen.com / techsupport@gyrozen.com / www.gyrozen.com GZ-QG-1536(E)(Rev.0)