Adjusting Copy Image Density - Ricoh FW740 Manual

ADJUSTING COPY IMAGE DENSITY

To make copies darker or lighter, change the density setting. There are 14 density levels: the
standard density level, three darker level, and 10 lighter levels. Set the density with the Lighter and
Darker keys under the density indicator.
Notes
p The indicator shows seven levels at a time. When you start from the standard image density, the
middle notch corresponds to the standard image density, the three right notches correspond to
darker densities, the three left notches to lighter densities.
p The brighter notch shows which level is now set. If you go lower than the leftmost notch, the
words Lighter Copy light up. The notches on the indicator correspond to the seven lightest
levels.
1 Press the Lighter or Darker key to adjust copy
density.
2 Each time you press the Lighter key,the indicator moves one step to the left. When the indicator
reaches the left edge, it returns to the right edge and the "Lighter Copy" indicator lights.
Energy Set
Saver Original
Wait
Lighter Copy
Vellum
Film
Copy Media Lighter Darker
Emergency Stop
Clear Modes/
Energy Saver
Program
Clear/Stop
27