Network Configuration Examples; Design Concepts For Using The Switch - Cisco WS-C3750-48PS-S Software Configuration Manual

Network Configuration Examples

•
•
•
•
•
•
•
•
•
•
•
•
•
•
Network Configuration Examples
This section provides network configuration concepts and includes examples of using the switch to
create dedicated network segments and interconnecting the segments through Fast Ethernet and Gigabit
Ethernet connections.
•
•
•
•
•

Design Concepts for Using the Switch

As your network users compete for network bandwidth, it takes longer to send and receive data. When
you configure your network, consider the bandwidth required by your network users and the relative
priority of the network applications they use.
Table 1-1
network to increase the bandwidth available to your network users.
Catalyst 3750 Switch Software Configuration Guide
1-12
CDP is enabled. For more information, see
UDLD is disabled. For more information, see
SPAN and RSPAN are disabled. For more information, see
RSPAN."
RMON is disabled. For more information, see
Syslog messages are enabled and appear on the console. For more information, see
"Configuring System Message Logging."
SNMP is enabled (Version 1). For more information, see
No ACLs are configured. For more information, see
with ACLs."
QoS is disabled. For more information, see
No EtherChannels are configured. For more information, see
EtherChannels."
IP unicast routing is disabled. For more information, see
Routing."
No HSRP groups are configured. For more information, see
IP multicast routing is disabled on all interfaces. For more information, see
"Configuring IP Multicast Routing."
MSDP is disabled. For more information, see
Fallback bridging is not configured. For more information, see
Bridging."
"Design Concepts for Using the Switch" section on page 1-12
"Small to Medium-Sized Network Using Catalyst 3750 Switches" section on page 1-17
"Large Network Using Catalyst 3750 Switches" section on page 1-18
"Multidwelling Network Using Catalyst 3750 Switches" section on page 1-21
"Long-Distance, High-Bandwidth Transport Configuration" section on page 1-22
describes what can cause network performance to degrade and how you can configure your
Chapter 25, "Configuring CDP."
Chapter 26, "Configuring UDLD."
Chapter 27, "Configuring SPAN and
Chapter 28, "Configuring RMON."
Chapter 30, "Configuring SNMP."
Chapter 31, "Configuring Network Security
Chapter 32, "Configuring QoS."
Chapter 33, "Configuring
Chapter 34, "Configuring IP Unicast
Chapter 35, "Configuring HSRP."
Chapter 37, "Configuring MSDP."
Chapter 38, "Configuring Fallback
Chapter 1 Overview
Chapter 29,
Chapter 36,
78-16180-02