Snmp Manager Functions - Cisco WS-C3750-48PS-S Software Configuration Manual

Network switch
Table of Contents

Advertisement

Chapter 30
Configuring SNMP
Table 30-1
Table 30-1 SNMP Security Models and Levels
Model
Level
SNMPv1
noAuthNoPriv
SNMPv2C
noAuthNoPriv
SNMPv3
noAuthNoPriv
SNMPv3
authNoPriv
SNMPv3
authPriv
(requires the
cryptographic software
image)
You must configure the SNMP agent to use the SNMP version supported by the management station.
Because an agent can communicate with multiple managers, you can configure the software to support
communications using SNMPv1, and SNMPv2C, and SNMPv3 protocols.

SNMP Manager Functions

The SNMP manager uses information in the MIB to perform the operations described in
Table 30-2 SNMP Operations
Operation
get-request
get-next-request
get-bulk-request
get-response
set-request
trap
1. With this operation, an SNMP manager does not need to know the exact variable name. A sequential search is performed to
2. The get-bulk command only works with SNMPv2 or later.
78-16180-02
identifies the characteristics of the different combinations of security models and levels.
Authentication
Community string No
Community string No
Username
MD5 or SHA
MD5 or SHA
Description
Retrieves a value from a specific variable.
Retrieves a value from a variable within a table.
2
Retrieves large blocks of data, such as multiple rows in a table, that would
otherwise require the transmission of many small blocks of data.
Replies to a get-request, get-next-request, and set-request sent by an NMS.
Stores a value in a specific variable.
An unsolicited message sent by an SNMP agent to an SNMP manager when some
event has occurred.
find the needed variable from within a table.
Encryption
Result
Uses a community string match for authentication.
Uses a community string match for authentication.
No
Uses a username match for authentication.
No
Provides authentication based on the HMAC-MD5
or HMAC-SHA algorithms.
DES
Provides authentication based on the HMAC-MD5
or HMAC-SHA algorithms.
Provides DES 56-bit encryption in addition to
authentication based on the CBC-DES (DES-56)
standard.
Catalyst 3750 Switch Software Configuration Guide
Understanding SNMP
Table
1
30-2.
30-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3750

Table of Contents