Cisco WS-C3750-48PS-S Software Configuration Manual page 943

Appendix B Working with the Cisco IOS File System, Configuration Files, and Software Images
Command
Step 7 archive download-sw /overwrite /reload
ftp:[[//username[:password]@location]/directory]
/image-name.tar
Step 8
archive download-sw /leave-old-sw /reload
ftp:[[//username[:password]@location]/directory]
/image-name.tar
The download algorithm verifies that the image is appropriate for the switch model and that enough
DRAM is present, or it aborts the process and reports an error. If you specify the /overwrite option, the
download algorithm removes the existing image on the flash device, whether or not it is the same as the
new one, downloads the new image, and then reloads the software.
If the flash device has sufficient space to hold two images and you want to overwrite one of these images
Note
with the same version, you must specify the /overwrite option.
If you specify the /leave-old-sw, the existing files are not removed. If there is not enough space to install
the new image and keep the running image, the download process stops, and an error message is
displayed.
78-16180-02
Purpose
Download the image file from the FTP server to the switch,
and overwrite the current image.
The /overwrite option overwrites the software image in
•
flash memory with the downloaded image.
The /reload option reloads the system after downloading
•
the image unless the configuration has been changed and
not been saved.
For //username[:password], specify the username and
•
password; these must be associated with an account on the
FTP server. For more information, see the
Download or Upload an Image File By Using FTP"
section on page B-25.
• For @location, specify the IP address of the FTP server.
For directory/image-name.tar, specify the directory
•
(optional) and the image to download. Directory and
image names are case sensitive.
Download the image file from the FTP server to the switch,
and keep the current image.
• The /leave-old-sw option keeps the old software version
after a download.
• The /reload option reloads the system after downloading
the image unless the configuration has been changed and
not been saved.
For //username[:password], specify the username and
•
password. These must be associated with an account on
the FTP server. For more information, see the
to Download or Upload an Image File By Using FTP"
section on page B-25.
For @location, specify the IP address of the FTP server.
•
For directory/image-name.tar, specify the directory
•
(optional) and the image to download. Directory and
image names are case sensitive.
Catalyst 3750 Switch Software Configuration Guide
Working with Software Images
"Preparing to
"Preparing
B-27