Configuring Port-Based Traffic Control
This chapter describes how to configure the port-based traffic control features on the Catalyst 3750
switch. Unless otherwise noted, the term switch refers to a standalone switch and a switch stack.
For complete syntax and usage information for the commands used in this chapter, refer to the command
Note
reference for this release.
This chapter consists of these sections:
•
•
•
•
•
Configuring Storm Control
These sections include storm control configuration information and procedures:
•
•
•
78-16180-02
Configuring Storm Control, page 24-1
Configuring Protected Ports, page 24-5
Configuring Port Blocking, page 24-6
Configuring Port Security, page 24-7
Displaying Port-Based Traffic Control Settings, page 24-16
Understanding Storm Control, page 24-2
Default Storm Control Configuration, page 24-3
Enabling Storm Control, page 24-3
C H A P T E R
Catalyst 3750 Switch Software Configuration Guide
24
24-1