Table of Contents
Advertisement
Chapter 14
Configuring VTP
Configuring VTP
This section includes guidelines and procedures for configuring VTP. These sections are included:
•
•
•
•
•
•
•
•
•
Default VTP Configuration
Table 14-2
Table 14-2 Default VTP Configuration
Feature
VTP domain name
VTP mode
VTP version
VTP password
VTP pruning
VTP Configuration Options
You can configure VTP by using these configuration modes.
•
•
For detailed information about vtp commands, refer to the command reference for this release.
VTP Configuration in Global Configuration Mode
You can use the vtp global configuration command to set the VTP password, the version, the VTP file
name, the interface providing updated VTP information, the domain name, and the mode, and to disable
or enable pruning. For more information about available keywords, refer to the command descriptions
in the command reference for this release. The VTP information is saved in the VTP VLAN database.
When VTP mode is transparent, the VTP domain name and mode are also saved in the switch running
78-16180-02
Default VTP Configuration, page 14-7
VTP Configuration Options, page 14-7
VTP Configuration Guidelines, page 14-8
Configuring a VTP Server, page 14-10
Configuring a VTP Client, page 14-11
Disabling VTP (VTP Transparent Mode), page 14-12
Enabling VTP Version 2, page 14-13
Enabling VTP Pruning, page 14-14
Adding a VTP Client Switch to a VTP Domain, page 14-15
shows the default VTP configuration.
VTP Configuration in Global Configuration Mode, page 14-7
VTP Configuration in VLAN Database Configuration Mode, page 14-8
You access VLAN database configuration mode by entering the vlan database privileged EXEC
command.
Default Setting
Null.
Server.
Version 1 (Version 2 is disabled).
None.
Disabled.
Catalyst 3750 Switch Software Configuration Guide
Configuring VTP
14-7
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
