Chapter 1 Overview; Features - Cisco WS-C3750-48PS-S Software Configuration Manual

Network switch
Table of Contents

Advertisement

Features

The Catalyst 3750 switches have these features:
Ease-of-Use and Ease-of-Deployment Features
Catalyst 3750 Switch Software Configuration Guide
1-2
Ease-of-Use and Ease-of-Deployment Features, page 1-2
Performance Features, page 1-3
Management Options, page 1-4
Manageability Features, page 1-4
SMI and EMI)
Availability Features, page 1-5
VLAN Features, page 1-6
Security Features, page 1-6
EMI)
QoS and CoS Features, page 1-7
Layer 3 Features, page 1-8
Monitoring Features, page 1-9
Express Setup for quickly configuring a switch for the first time with basic IP information, contact
information, switch and Telnet passwords, and Simple Network Management Protocol (SNMP)
information through a browser-based program. For more information about Express Setup, refer to
the hardware installation guide.
User-defined and Cisco-default Smartports macros for creating custom switch configurations for
simplified deployment across the network.
Cluster Management Suite (CMS) graphical user interface (GUI) for
Simplifying and minimizing switch, switch stack, and switch cluster management through a
supported web browser from anywhere in your intranet.
Accomplishing multiple configuration tasks from a single CMS window without needing to
remember command-line interface (CLI) commands to accomplish specific tasks.
Interactive guide mode that guides you in configuring complex features such as VLANs, ACLs,
and quality of service (QoS).
Automated configuration wizards that prompt you to provide only the minimum required
information to configure complex features such as QoS priorities for video traffic, priority
levels for data applications, and security.
Downloading an image to a switch by using HTTP or TFTP.
Applying actions to multiple ports and multiple switches at the same time, such as VLAN and
QoS settings, inventory and statistic reports, link- and switch-level monitoring and
troubleshooting, and multiple switch software upgrades.
Viewing a topology of interconnected devices to identify existing switch clusters and eligible
switches that can join a cluster and to identify link information between switches.
Monitoring real-time status of a switch or multiple switches from the LEDs on the front-panel
images. The system, redundant power system (RPS), and port LED colors on the images are
similar to those used on the physical LEDs.
(includes a feature requiring the cryptographic versions of the
(includes a feature requiring the cryptographic versions of the SMI and
(includes features requiring the EMI)
Chapter 1
Overview
78-16180-02

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3750

Table of Contents