Bridge Protocol Data Unit Format And Processing - Cisco WS-C3750-48PS-S Software Configuration Manual

Understanding RSTP
Figure 18-3 Sequence of Events During Rapid Convergence
8. Agreement

Bridge Protocol Data Unit Format and Processing

The RSTP BPDU format is the same as the IEEE 802.1D BPDU format except that the protocol version
is set to 2. A new one-byte version 1 Length field is set to zero, which means that no version 1 protocol
information is present.
Table 18-2 RSTP BPDU Flags
Bit
0
1
2–3:
4
5
6
7
The sending switch sets the proposal flag in the RSTP BPDU to propose itself as the designated switch
on that LAN. The port role in the proposal message is always set to the designated port.
The sending switch sets the agreement flag in the RSTP BPDU to accept the previous proposal. The port
role in the agreement message is always set to the root port.
Catalyst 3750 Switch Software Configuration Guide
18-10
4. Agreement
5. Forward
2. Block
9. Forward
6. Proposal
Table 18-2
Function
Topology change (TC)
Proposal
Port role:
00 Unknown
01 Alternate port
10 Root port
11 Designated port
Learning
Forwarding
Agreement
Topology change acknowledgement (TCA)
1. Proposal
Edge port
3. Block
11. Forward
7. Proposal
Root port
Designated port
shows the RSTP flag fields.
Chapter 18 Configuring MSTP
10. Agreement
78-16180-02