Default Settings After Initial Switch Configuration - Cisco WS-C3750-48PS-S Software Configuration Manual

Chapter 1 Overview
–
–
No Smartports macros are defined. For more information, see
•
Macros."
VLANs
•
–
–
–
–
–
–
–
For STP, PVST+ is enabled on VLAN 1. For more information,
•
MSTP is disabled. For more information, see
•
Optional spanning-tree features are disabled. For more information, see
•
Optional Spanning-Tree Features."
Flex Links are not configured. For more information, see
•
DHCP snooping is disabled. The DHCP snooping information option is enabled. For more
•
information, see
IP source guard is disabled. For more information, see
•
and IP Source Guard."
Dynamic ARP inspection is disabled on all VLANs. For more information, see
•
"Configuring Dynamic ARP Inspection."
IGMP snooping is enabled. No IGMP filters are applied. For more information, see
•
"Configuring IGMP Snooping and MVR."
IGMP throttling setting is deny. For more information, see
•
Snooping and MVR."
MVR is disabled. For more information, see
•
Port-based traffic
•
–
–
–
–
78-16180-02
Flow control is off. For more information, see
Characteristics."
PoE is autonegotiate. For more information, see
Characteristics."
Default VLAN is VLAN 1. For more information, see
VLAN trunking setting is dynamic auto (DTP). For more information, see
"Configuring VLANs."
Trunk encapsulation is negotiate. For more information, see
VLANs."
VTP mode is server. For more information, see
VTP version is Version 1. For more information, see
No private VLANs are configured. For more information, see
VLANs."
Voice VLAN is disabled. For more information, see
Chapter 21, "Configuring DHCP Features and IP Source Guard."
Broadcast, multicast, and unicast storm control is disabled. For more information, see
Chapter 24, "Configuring Port-Based Traffic Control."
No protected ports are defined. For more information, see
Traffic Control."
Unicast and multicast traffic flooding is not blocked. For more information, see
"Configuring Port-Based Traffic Control."
No secure ports are configured. For more information, see
Traffic Control."

Default Settings After Initial Switch Configuration

Chapter 11, "Configuring Interface
Chapter 11, "Configuring Interface
Chapter 12, "Configuring Smartports
Chapter 13, "Configuring VLANs."
Chapter 13, "Configuring
Chapter 14, "Configuring VTP."
Chapter 14, "Configuring VTP."
Chapter 15, "Configuring Private
Chapter 16, "Configuring Voice VLAN."
Chapter 17, "Configuring STP."
Chapter 18, "Configuring MSTP."
Chapter 20, "Configuring Flex Links."
Chapter 21, "Configuring DHCP Features
Chapter 23, "Configuring IGMP
Chapter 23, "Configuring IGMP Snooping and MVR."
Chapter 24, "Configuring Port-Based
Chapter 24, "Configuring Port-Based
Catalyst 3750 Switch Software Configuration Guide
Chapter 13,
Chapter 19, "Configuring
Chapter 22,
Chapter 23,
Chapter 24,
1-11