Site Requirements - Cisco Catalyst 9500 Series Hardware Installation Manual

Site Requirements

Warning
Warning
Warning
Warning
Warning
Warning
Warning
Site Requirements
Planning a proper location for the switch and layout of the equipment rack or wiring closet is essential for
successful system operation. These sections describe some of the basic site requirements that you should be
aware of as you prepare to install your switch, including the following:
• Environmental factors can adversely affect the performance and longevity of your system.
• Install the switch in an enclosed, secure area, ensuring that only qualified personnel have access to the
• Equipment that is placed too closely together or that is inadequately ventilated may cause system
• Poor equipment placement can make chassis panels inaccessible and difficult to maintain.
Cisco Catalyst 9500X Series Switches Hardware Installation Guide
16
Hazardous voltage or energy is present on the backplane when the system is operating. Use caution
when servicing. Statement 1034
Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
This product requires short-circuit (overcurrent) protection, to be provided as part of the building
installation. Install only in accordance with national and local wiring regulations. Statement 1045
When installing or replacing the unit, the ground connection must always be made first and disconnected
last. Statement 1046
To reduce risk of electric shock or fire, installation of the equipment must comply with local and national
electrical codes. Statement 1074
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams
or view directly with optical instruments. Statement 1051
Only an instructed person or skilled person should be allowed to install, replace, or service this equipment.
See statement 1089 for the definition of an instructed or skilled person. Statement 1091
switch and control of the environment.
over-temperature conditions, leading to premature component failure.
Preparing for Installation