Formatting An Sd Card; Sd Card Precautions During Use - Casio FX-7400GII - SOFTWARE VERSION 2-00 User Manual

2. Formatting an SD Card

• Use the procedure under "Reset" (page 12-3) to format an SD card.

3. SD Card Precautions during Use

• SD card problems can normally be corrected by reformatting the card. However, it is always a
good idea to take along more than one SD card to avoid data storage problems.
• Card formatting (initialization) is recommended before using a new SD card for the first time.
• If an SD card has been formatted on a computer or other device, you can use it as-is without
reformatting. A computer or other device also will be able to use an SD card that has been
formatted with the calculator.
• Never perform any of the following operations while the SD card is being accessed.
- Removing the SD card
- Connecting or disconnecting a USB cable
- Turning off the calculator
- When connected to a computer, exiting the FA-124 software or shutting down the computer
• Note that an SD card needs to be oriented correctly (proper side must be facing upwards,
the proper end must be inserted) when inserting it into the calculator. Trying to force an SD
card into the slot when it is oriented incorrectly can damage the card and slot.
• Use of certain SD cards while calculator battery power is low can cause the display to go
blank without displaying the low battery warning message. If this happens, replace the
batteries.
Recommended SD Card Types
Toshiba
SD-NA032MT
SD-NA512MT
SD-C01GTR
SanDisk
SDSDB-64-J60
SDSDB-512-J60
SDSDB-1024
For detailed information (specifications, features, etc.) about the SD card, contact the SD card
manufacturer.
SD-NA064MT SD-NA128MT
SD-FA128MT SD-FA256MT
SD-C02GTR SD-C02GT4
SDSDB-128-J60
SDSDH-256-903
SDSDB-2048
SD-NA256MT
SDSDB-256-J60
SDSDH-512-903
SDSDH-1024
14-3
SDSDH-002G