Formatting An Sd Card; Sd Card Precautions During Use - Casio fx-FD10 Pro User Manual

2. Formatting an SD Card

• Use the procedure under "Reset" (page 9-3) to format an SD card.

3. SD Card Precautions during Use

• SD card problems can normally be corrected by reformatting the card. However, it is always a
good idea to take along more than one SD card to avoid data storage problems.
• Card formatting (initialization) is recommended before using a new SD card for the first time.
• If an SD card has been formatted on a computer or other device, you can use it as-is without
reformatting. A computer or other device also will be able to use an SD card that has been
formatted with the calculator.
• Never perform any of the following operations while the SD card is being accessed.
- Removing the SD card
- Connecting or disconnecting a USB cable
- Turning off the calculator
• Note that an SD card needs to be oriented correctly (proper side must be facing upwards,
the proper end must be inserted) when inserting it into the calculator. Trying to force an SD
card into the slot when it is oriented incorrectly can damage the card and slot.
• Use of certain SD cards while calculator battery power is low can cause the display to go
blank without displaying the low battery warning message. If this happens, replace the
batteries.
k Supported SD Cards
SD Memory Cards
SDHC Memory Cards
Important!
The time required for data writing and reading depends on the type of the SD card being used.
For detailed information (specifications, features, etc.) about the SD card, contact the SD card
manufacturer.
Maximum capacity: 2 GB
Maximum capacity: 32 GB
11-3