Ssht Mode Memory - Casio FX-7400GII - SOFTWARE VERSION 2-00 User Manual

5. S SHT Mode Memory
•
You can use the calculator's different types of memory (variables, list memory, file memory,
matrix memory) to store data, and recall data from a memory into the spreadsheet.
Saving Spreadsheet Data to a Memory
The following table shows an overview of the store operations for each type of memory. For
details about each operation, see the example operations following the table.
Memory Type
Variables
r
(A ~ Z, , )
List Memory
(List 1 ~ List 26)
File Memory
(File 1 to File 6)
Matrix Memory
(Mat A ~ Mat Z)
Important!
The following describes what happens if you try to store data in memory when a cell does not
contain any data, when a cell contains text, or when ERROR is displayed for a cell.
• If you are assigning data to a variable, an error occurs.
• If you are storing data in list memory, file memory, or matrix memory, 0 is written into the
applicable cell(s).
Example: To store column data in list memory
1. In a single column, select the range of cells you want to store in list memory.
• For example, you could select A1:A10.
2. Press ( )
• This will display a screen like the one shown to the right.
The "Cell Range" setting will show the range of cells you
selected in step 1.
3. Press to move the highlighting to "List[1-26]".
You can assign the content of a single cell to a variable.
While a single cell is selected, press
then specify the variable name on the screen that appears.
You can store data in a range of cells in a single row or a single
column in list memory.
While a range of cells in a single row or single column is selected,
press ( )
on the screen that appears.
You can store data in a range of cells that spans a multiple rows
and columns in file memory. While a range of cells is selected, press
( ) (STO)
screen that appears.
The first column of the selected range is stored in the specified file
as List 1, the second column is saved as List 2, and so on.
You can store data in a range of cells that spans a multiple rows and
columns in matrix memory. While a range of cells is selected, press
( ) (STO)
screen that appears.
The first column of the selected range is stored in the specified
matrix as List 1, the second column is saved as List 2, and so on.
(STO) (LIST).
Store Operation
(STO) (LIST), and then specify the list number
(FILE), and then specify the file number on the
(MAT), and then specify the matrix name on the
9-20
( ) (STO) (VAR), and