3. Input any comment text you want about the key operation sequence.
4. After inputting comment text, press
• This will return to the operation pattern selection screen. You can now edit the guide by
pressing
(PLAY) and selecting the key operation you want to change.
See "Editing a Guide" (page 10-18) for details about editing guides.
To create an AUTO operation
The following operation assumes that you are continuing from the procedure under "To create
a 1-key operation" (page 10-15).
1. On the operation pattern selection screen, press
• This will display the dialog box shown to the right.
2. Press
(OK).
•
... Executing the guide performs auto key input at low speed. Use this option for
operations that the teacher explains while they are being performed, and for trace
operations performed G-Solve analysis.
•
... Executing the guide performs auto key input at medium speed. Use this option for
simple value input, expression input, and function menu operations.
•
... Executing the guide performs auto key input at high speed. Use this option for
tracing or box zooming a graph.
•
... Executing the guide performs auto key input at ultra-high speed. Use this option
when creating list or matrix data. This speed is too fast for the eye to follow.
3. Press
,
,
4. Input the key operation sequence.
• Here we will input the following key sequence.
...
(15 times)
5. After input is complete, press
• This will display a comment box.
6. Input any comment text you want about the key operation sequence.
to register the 1-key operation input.
, or
.
.
10-16
(AUTO).