Casio FX-7400GII - SOFTWARE VERSION 2-00 User Manual page 332

Message
Argument • Incorrect argument specification
ERROR for a command that requires an
argument.
Dimension • Illegal dimension used during matrix
ERROR or list calculations.
Range ERROR
Input of an improper V-Window
value.
V-Window range settings exceeded
when a graph is redrawn.
Input of an improper value on the
range screen and use of that value
for execution.
The spreadsheet cell range was
exceeded by paste, recall, or other
cell operation.
Condition • Execution of a calculation or
ERROR function before all conditions
required for execution are met.
Non-Real • Calculation that produces a complex
ERROR number when Real is specified for
the Complex Mode setting on the
Setup screen, even though the
argument is a real number.
Complex • List containing complex number
Number In List used in a calculation or operation
for which complex number data is
invalid.
Complex • Matrix containing complex number
Number in used in a calculation or operation
Matrix for which complex number data is
invalid.
Complex • Data sent from a function of this
Number in calculator (matrix, etc.) includes
Data complex number data, but the
corresponding function of the
receiving calculator does not
support data that includes complex
numbers.
Example: Attempting to send a
matrix containing a complex number
in an element to CFX-9850G.
Can't Simplify • Fraction simplification was
attempted using the
(page 2-21), but simplification
could not be performed using the
specified divisor.
Example: Specifying a divisor of 3 to
simplify the fraction 4/8.
Meaning
Simp function
-2
Countermeasure
• Correct the argument.
• Check the matrix or list dimension.
Change the V-Window value so it
is within range.
Redraw using the proper settings.
Input a proper range value.
Repeat the procedure taking
care that the cell range is not
exceeded.
• Check the conditions and make
any necessary corrections.
• Change the Complex Mode
setting to something other than
Real.
• Change all data in the list to real
numbers.
• Change all data in the matrix to
real numbers.
• Send data that does not include
complex numbers.
• Specify a different divisor or
execute Simp without specifying
any divisor.