Casio FX-7400GII - SOFTWARE VERSION 2-00 User Manual page 308

2. Press (SAVE).
This displays the save location selection screen
II
(fx-9860G SD only).
• ... storage memory
• ... SD card
3. Press or (fx-9860G
This displays a folder selection screen.
4. Use and to select the folder where you want to save the data.
5. Press to start the backup.
• Backup data is saved in a file named BACKUP.g2m.
The message "Complete!" appears when the backup operation is finished.
Press to return to the screen displayed in step 1.
The following message appears if there is already backup data in the storage memory.
Press (Yes) to back up the data, or
A "Memory Full" occurs when there is not enough space available in the storage memory to
complete the backup operation.
To restore backup data to the main memory
1. On the initial MEMORY mode screen press
• On the screen that appears, you can confirm whether or not there is backup data in the
storage memory.
2. Press (LOAD).
This displays the restore source data selection screen
II
(fx-9860G SD only).
• ... Restore from storage memory
• ... Restore from SD card
3. Press or (fx-9860G
This displays the folder selection screen.
II
SD only).
(No) to cancel the backup operation.
(BKUP).
II
SD only).
11-10