Casio FX-7400GII - SOFTWARE VERSION 2-00 User Manual page 122

To generate a table using a table range
Example To generate a table as the value of variable x changes from –3 to 3, in
increments of 1
(SET)
The numeric table range defines the conditions under which the value of variable
during function calculation.
Start ............ Variable
End ............. Variable
Step ............ Variable
After specifying the table range, press
To generate a table using a list
1. While the Table relation list is on the screen, display the Setup screen.
2. Highlight Variable and then press
3. Select the list whose values you want to assign for the
• To select List 6, for example, press
item of the Setup screen to change to List 6.
4. After specifying the list you want to use, press
Generating a Table
Example To generate a table of values for the functions stored in memory areas
Y1 and Y3 of the Table relation list
Use and to move the highlighting to the
function you want to select for table generation and
press (SEL) to select it.
The "=" sign of selected functions is highlighted on
the screen. To deselect a function, move the cursor
to it and press (SEL) again.
Press (TABL) to generate a number table using
the functions you selected. The value of variable
changes according to the range or the contents
of the list you specified.
The example screen shown here shows the results based
on the contents of List 6 (–3, –2, –1, 0, 1, 2, 3).
Each cell can contain up to six digits, including negative sign.
TABLE
x
start value
x
end value
x
value change (interval)
(LIST) to display the pop-up window.
5-16
to return to the Table relation list.
x
-variable.
. This causes the setting of the Variable
to return to the previous screen.
x
x
changes