Setting The Aspect Ratio - NEC MultiSync M431 User Manual

Setting the Aspect Ratio

Press the ASPECT button on the remote control to cycle through the options available for the current input signal.


NOTEN: [Media Player] is not available.
➙ ➙
[FULL] [WIDE] [1:1]
Aspect ratio of
Unchanged view*
image
4:3
Squeeze
Letterbox
* 2 : Gray areas indicate unused portions of the screen.
[1:1]: Shows the image in a 1 by 1 pixel format.
[ZOOM]
• The zoom function increases the image size, which expands the image beyond the active screen area. The parts of the
image outside the active screen area are not shown.
➙ ➙
[ZOOM] [NORMAL]
Recommended selection for picture
2
[NORMAL]
[FULL]
[WIDE]
ZOOM
2
aspect*
Reproduces the aspect ratio that is sent from
the source.
Fills the entire screen.
Expands a 16:9 letter box signal to fill the entire
screen.
ZOOM
English−37
Description