To Compensating The Outline Of Images [Outlineenhancer]; To Enable/Disable The Automatic Contrast Adjustment [Contrastenhancer]; To Make Fine Adjustment Of The Balance Of Red; Green, Blue (Rgb) [Rgb Balance] - Eizo Foris FX2431 User Manual

●
To compensating the outline of images [OutlineEnhancer]
The emphasis level of outline is adjusted.
Adjustable range: -5 to 5
(1) Choose [Color] in the Setting menu and press
(2) Choose [Advanced Settings] in the [Color] menu and press
(3) Choose [OutlineEnhancer] in the [Advanced Settings] menu and press
The [OutlineEnhancer] adjustment menu appears.
(4) Adjust the emphasis level of outline with t or u , and then press
The adjustment is completed.
●
To enable/disable the automatic contrast adjustment
[ContrastEnhancer]
This function allows you to select whether the contrast of images is
automatically adjusted by controlling the backlight for dark scenes.
(1) Choose [Color] in the Setting menu and press
(2) Choose [Advanced Settings] in the [Color] menu and press
(3) Choose [ContrastEnhancer] in the [Advanced Settings] menu and press
.
The [ContrastEnhancer] setting menu appears.
(4) Select "Enable" or "Disable" with t or u , and then press
The setting is completed.
●
To make fine adjustment of the balance of red, green, blue
(RGB) [RGB Balance]
This function allows you to adjust each color of red, green and blue according
to your taste.
Adjustable range: -3 to 3
(1) Choose [Color] in the Setting menu and press
(2) Choose [Advanced Settings] in the [Color] menu and press
(3) Choose [RGB Balance] in the [Advanced Settings] menu and press
The [RGB Balance] adjustment menu appears.
(4) Adjust the values for red, green and blue with t or u , and then press
The adjustment is completed.
0
Chapter 3 Settings and Adjustments
.
.
.
.
.
.
.
.
.
.
.
NOTE NOTE
• You cannot adjust the value if the • You cannot adjust the value if the
function is not displayed, depending function is not displayed, depending
on the color mode selected. (See on the color mode selected. (See
"Adjustment items in each mode" on "Adjustment items in each mode" on
page page 27.) 27.)
NOTE NOTE
• You cannot adjust the value if the • You cannot adjust the value if the
function is not displayed, depending function is not displayed, depending
on the color mode selected. (See on the color mode selected. (See
"Adjustment items in each mode" on "Adjustment items in each mode" on
page page 27.) 27.)
Attention Attention
• [RGB Balance] is available only for • [RGB Balance] is available only for
VIDEO input or HDMI (video signal) VIDEO input or HDMI (video signal)
input. input.
NOTE NOTE
• When setting "0" for all values, the • When setting "0" for all values, the
status is changed to "Standard". status is changed to "Standard".