Table of Contents
Advertisement
●
To adjust the gamma value [Gamma]
The gamma value can be adjusted. The luminance of the monitor varies
depending on the input signal, however, the variation rate is not proportional to
the input signal. To keep the balance between the input signal and the luminance
of the monitor is called as "Gamma correction".
Adjustable range: 1.8, 2.0, 2.2, 2.4, 2.6, 2.8
(1) Choose [Color] in the Setting menu and press
(2) Choose [Advanced Settings] in the [Color] menu and press
(3) Choose [Gamma] in the [Advanced Settings] menu and press
The [Gamma] adjustment menu appears.
(4) Adjust the gamma value with t or u , and then press
The adjustment is completed.
●
To adjust the gain value [Gain]
Each luminance of red/green/blue composing the color is called "Gain". The
gain adjustment may change the color tone of the "White" (when the max input
signal for each color is obtained)
Adjustable range: 0 to 100
(1) Choose [Color] in the Setting menu and press
(2) Choose [Advanced Settings] in the [Color] menu and press
(3) Choose [Gain] in the [Advanced Settings] menu and press
The [Gain] adjustment menu appears.
(4) Adjust the respective value of Red, Green or Blue with t or u , and then
press
.
The adjustment is completed.
●
To reduce the noise of images [Noise Filter]
Precise noise or a noise at MPEG compression can be reduced.
Adjustable range: Disable, High, Low
(1) Choose [Color] in the Setting menu and press
(2) Choose [Advanced Settings] in the [Color] menu and press
(3) Choose [Noise Filter] in the [Advanced Settings] menu and press
The [Noise Filter] setting menu appears.
(4) Select "Disable", "High" or "Low" with t or u , and then press
The setting is completed.
.
.
.
.
.
.
.
.
.
.
.
Chapter 3 Settings and Adjustments
NOTE
NOTE
• You cannot adjust the value if the
• You cannot adjust the value if the
function is not displayed, depending
function is not displayed, depending
on the color mode selected. (See
on the color mode selected. (See
"Adjustment items in each mode" on
"Adjustment items in each mode" on
page
page
27.)
27.)
Attention
Attention
• [Gain] is available only for PC input
• [Gain] is available only for PC input
or HDMI (PC signal) input.
or HDMI (PC signal) input.
NOTE
NOTE
• You cannot adjust the value if the
• You cannot adjust the value if the
function is not displayed, depending
function is not displayed, depending
on the color mode selected. (See
on the color mode selected. (See
"Adjustment items in each mode" on
"Adjustment items in each mode" on
page
page
27.)
27.)
• When choosing [Reset] in the [Gain]
• When choosing [Reset] in the [Gain]
adjustment menu and pressing
adjustment menu and pressing
the gain value returns to the default
the gain value returns to the default
settings (factory settings).
settings (factory settings).
Attention
Attention
• [Noise Filter] is available only for
• [Noise Filter] is available only for
VIDEO input or HDMI (video signal)
VIDEO input or HDMI (video signal)
input.
input.
• The screen image may be degraded
• The screen image may be degraded
depending on the setting.
depending on the setting.
NOTE
NOTE
• You cannot adjust the value if the
• You cannot adjust the value if the
function is not displayed, depending
function is not displayed, depending
on the color mode selected. (See
on the color mode selected. (See
"Adjustment items in each mode" on
"Adjustment items in each mode" on
page
page
27.)
27.)
,
,
1
Advertisement
Table of Contents
