Eizo Foris FX2431 User Manual page 41

Eizo fx2431: user guide
Hide thumbs Also See for Foris FX2431:
Table of Contents

Advertisement

Problems
10. Unselectable menu items
11. Buttons on the monitor do not operate.
1. Remote control does not work.
1. ScreenManager Pro for LCD does not run.
(PC Input / HDMI (PC Signal) Input)
Problems
1. No Picture
• Power indicator does not light.
• Power indicator lights orange.
• Power indicator lights blue.
Possible cause and remedy
• The selectable menu items differ depending on the input
signal. Please check the Setting menu list.
(Refer to "Setting menu list" on
• Check whether the operation lock function works. (Refer
to
page
38.)
• Check whether the remote control point at the detector.
• Check that there are not obstacles between the remote
control and the detector.
• Check whether the battery power is run out.
• Check whether the battery is installed in the right
direction.
• Check whether the USB cable is connected correctly.
• Auto FineContrast, Color Adjustment and Screen
Adjustment run only on the PC connected to PC input
(PC1 or PC2), not the one connected to HDMI input.
The following functions run the PC connected to HDMI
input.
- Some Hotkeys
- Timer
- Sound
• Check the setting in [USB Selection] of [Monitor Settings]
menu. (Refer to
page
14.)
- When it does not run on the PC connected to PC input
"Auto" or the port ("PC1" or "PC2") connected to the
PC with a USB cable is selected.
- When it does not run on the PC connected to HDMI
input
The port ("PC1" or "PC2") connected to the PC with a
USB cable is selected.
Possible cause and remedy
• Check whether the power cord is correctly connected. If
the problem persists, turn off the main power, and then
turn it on again a few minutes later.
• Turn the main power switch on.
• Press
on the remote control (or
• Press any buttons (except for
control.
• Operate the mouse or keyboard.
• Check whether the PC is turned on.
• Check whether the PC is properly connected to the
monitor.
• Set each adjusting value in [Brightness], [Contrast] and
[Gain] to higher level. (Refer to
Chapter 4 Troubleshooting
page
48.)
on the monitor).
) on the remote
page 28,
31.)
1

Advertisement

Table of Contents
loading

Table of Contents