Table of Contents
Advertisement
●
To adjust the hue [Hue]
This function allows you to adjust the hue. If you set the hue to a high value,
the image turns greenish. If low, the image turns purplish.
Adjustable range: -50 to 50
(1) Choose [Color] in the Setting menu and press
(2) Choose [Hue] in the [Color] menu and press
The [Hue] adjustment menu appears.
(3) Adjust the hue with t or u , and then press
The adjustment is completed.
●
To adjust the color temperature [Temperature]
The color temperature can be adjusted. The color temperature is normally used
to express the hue of "White" and/or "Black" by a numerical value. The value
is expressed in degrees "K" (Kelvin).
In the same way as the flame temperature, the image on the monitor is displayed
reddish if the color temperature is low and is bluish if the color temperature is
high. The gain preset values are set for each color temperature setting value.
5000K
The white color image is displayed reddish. The 5000K or 6000K
is usually used in the printing industry.
6500K
The white color image is displayed in warm white like paper white.
The temperature is suitable to display photographs or video
images.
9300K
The white color image is displayed slightly bluish white.
Adjustable range: Off, 4000K-10000K (specified by every 500K unit,
including 9300K)
(1) Choose [Color] in the Setting menu and press
(2) Choose [Temperature] in the [Color] menu and press
The [Temperature] adjustment menu appears.
(3) Adjust the color temperature with t or u , and then press
The adjustment is completed.
●
To change the setting of automatic brightness adjustment
function [Auto EcoView]
The screen brightness is automatically adjusted corresponding to both the
brightness of the image and the environmental brightness detected by the sensor
at the lower side of the monitor.
Adjustable range: Standard, High, Disable
(1) Choose [Color] in the Setting menu and press
(2) Choose [Advanced Settings] in the [Color] menu and press
(3) Choose [Auto EcoView] in the [Advanced Settings] menu and press
The [Auto EcoView] setting menu appears.
(4) Select "Standard", "High" or "Disable" with t or u , and then press
The setting is completed.
.
.
.
.
.
.
.
.
.
.
Chapter 3 Settings and Adjustments
Attention
Attention
• This function does not enable to
• This function does not enable to
display every color gradation.
display every color gradation.
NOTE
NOTE
• [Gain] allows you to perform more
• [Gain] allows you to perform more
advanced adjustment (See "To adjust
advanced adjustment (See "To adjust
the gain value [Gain]" on
the gain value [Gain]" on
page
page
• If you set to "Off", the image is
• If you set to "Off", the image is
displayed in the preset color of the
displayed in the preset color of the
monitor (Gain: 100 for each RGB).
monitor (Gain: 100 for each RGB).
• When changing the gain value, the
• When changing the gain value, the
color temperature adjusting range is
color temperature adjusting range is
changed to "Off".
changed to "Off".
NOTE
NOTE
• You cannot adjust the value if the
• You cannot adjust the value if the
function is not displayed, depending
function is not displayed, depending
on the color mode selected. (See
on the color mode selected. (See
"Adjustment items in each mode" on
"Adjustment items in each mode" on
page
page
27.)
27.)
• Do not cover the sensor.
• Do not cover the sensor.
• Set to "High" if you feel a little
• Set to "High" if you feel a little
brighter with "Standard" setting
brighter with "Standard" setting
status.
status.
31).
31).
9
Advertisement
Table of Contents
