Table of Contents
Advertisement
Problems
Whole screen is flickering or blurring (VIDEO2
.
input).
6.
The color shown on the display is not correct
(HDMI (video signal) input).
7.
The screen flashes (HDMI (video signal) input).
8. No sound/Volume control is not available (HDMI
(video signal) input).
• The message below appears.
Unsupported Sound
9. The connected device is not detected correctly
(when using the HDMI CEC function).
• The device is not displayed in [Device List].
• The input signal of the device is wrong.
• "Error" is displayed.
●
Messages List
The meanings of the main messages appearing on the screen are described below.
Messages
"The power will turn off soon."
"This operation is not available."
"Select [Enable] of [HDMI CEC] in
®
"ScreenManager
" "
Chapter 4 Troubleshooting
• Adjust the phase in [Monitor Settings] - [Advanced
Settings] menu - [Phase]. (Refer to
• Change the color space of the video signal in [Monitor
Settings] - [Advanced Settings] menu - [Color Space].
(Normally, select "Auto".)
• Transferable signals differ on the category of the HDMI
cable. Check whether the cable is High Speed compliant.
• Check whether the applicable format of the device
connected is correct.
Refer to
monitor.
• The connected device is applicable to HDMI CEC.
• Multiple devices are not connected through such as
HDMI selector. This monitor does not support the
connection through HDMI selector.
• Check whether the setting of the connection has been
changed. The setting of the connected device needs to
be changed when adding the devices to be connected
or changing the connected input signal. Display the Link
Menu and select [Search Devices] in [Device List] with
the connected device powered on. (Refer to
(While the "Please wait a few minutes." message is
displayed, do not turn off the monitor and connected
device.)
• Appears on the display one minute before the power turns off when [No
Signal Off], [No Operation Off] or the Off Timer is set.
• Appears if you press
or the signal that is outside the specification is input to the monitor.
• Appears if you press
• Appears if you press
• Appears if you press
displays the PC input signal from HDMI input during PinP display.
• Appears if you press
1080p @ 24 Hz / 25 Hz / 30 Hz for PC input or HDMI input.
• Appears if you press
[Monitor Settings] - [HDMI CEC Setting] menu - [HDMI CEC].
Possible cause and remedy
page 47
for the sound input format of the
Description
,
or
on the remote control when no signal
on the remote control during PinP display.
on the remote control during PinP display.
on the remote control when the Sub-Window
on the remote control when the input signal is
on the remote control when "Disable" is set in
page
25.)
page
17.)
Advertisement
Table of Contents
