Table of Contents
Advertisement
- PinP (Picture in Picture) Display
●
To turn PinP display on or off
When the PC (PC input) and AV device (VIDEO input / HDMI input) are
connected to the monitor, both images can be displayed in Main Window and
Sub-Window simultaneously.
PC
(PC input signal screen)
AV device
(VIDEO input/HDMI input
signal screen)
(1) Press
on the remote control.
Each time you press
●
To change the output sound
This function allows you to change the output sound in PinP display mode.
(Main Window and Sub-Window)
(1) Press
on the remote control.
Each time you press
●
To change the Main Window and Sub-Window input signal
This function allows you to change the input signal of Main Window and
Sub-Window.
■
Main Window
(1) Press
on the remote control.
■
Sub-Window
(1) Press
or
on the remote control.
●
To change the Sub-Window position
This function allows you to change the Sub-Window position. (Upper Right,
Lower Right, Lower Left and Upper Left)
(1) Press
on the remote control.
Each time you press
●
To set the translucent level for Sub-Window
[Sub-Window Lucent]
This function allows you to display the Sub-Window translucently and see the
Main Window through it.
Adjustable range: 0, 1, 2, 3
(1) Choose [Monitor Settings] in the Setting menu and press
(2) Choose [Sub-Window Lucent] in the [Monitor Settings] menu and press
.
The [Sub-Window Lucent] setting menu appears.
(3) Select the level with t or u , and then press
The setting is completed.
, the setting switches between ON and OFF.
, the setting of sound changes.
, the position changes.
Main Window
(PC input signal screen)
Sub-Window
(VIDEO input/HDMI
input signal screen)
.
.
Attention
Attention
• The Main Window is not used for
• The Main Window is not used for
VIDEO input/HDMI input signal
VIDEO input/HDMI input signal
display and the Sub-Window is not
display and the Sub-Window is not
used for PC input signal display.
used for PC input signal display.
The image of the PC connected to
The image of the PC connected to
HDMI input is displayed on Sub-
HDMI input is displayed on Sub-
Window.
Window.
NOTE
NOTE
• In PinP display mode, by pressing
• In PinP display mode, by pressing
Sub-Window size can be
Sub-Window size can be
changed.
changed.
However, when the signal of 1080i,
However, when the signal of 1080i,
720p or 1080p is displayed in the
720p or 1080p is displayed in the
Sub-Window, the size is fixed to
Sub-Window, the size is fixed to
"16:9".
"16:9".
When the PC signal from HDMI input
When the PC signal from HDMI input
is displayed in the Sub-Window, the
is displayed in the Sub-Window, the
size cannot be changed with
size cannot be changed with
• The mode setting of PC input signal
• The mode setting of PC input signal
is applied to the color mode in PinP
is applied to the color mode in PinP
display mode.
display mode.
NOTE
NOTE
• In PinP display mode, the Sub-
• In PinP display mode, the Sub-
Window can be displayed in full
Window can be displayed in full
screen (single display) by pressing
screen (single display) by pressing
on the remote control.
on the remote control.
Press the button again to return to
Press the button again to return to
PinP display mode.
PinP display mode.
Chapter 2 Operation
.
.
19
Advertisement
Table of Contents
