Checking Tcp/Ip Settings - Windows Nt4.0 - TRENDnet TEW-453APB User Manual
108mbps 802.11g hot-spot access point
Hide thumbs
Also See for TEW-453APB:
- Specifications (2 pages) ,
- Quick installation manual (14 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Appendix C - TCP/IP
Checking TCP/IP Settings - Windows NT4.0
1. Select Control Panel - Network, and, on the Protocols tab, select the TCP/IP protocol, as
shown below.
Figure 64: Windows NT4.0 - TCP/IP
2. Click the Properties button to see a screen like the one below.
Figure 65: Windows NT4.0 - IP Address
87
Advertisement
Table of Contents
