Tcp/Ip Setting; Statistics; Upgrade Firmware - TRENDnet TEW-230APB User Manual

Add WDS AP: set the MAC address of which AP you want to
communicate with, type a name in the comment for the AP to
easier the manager to monitor.
Current WDS AP List: when there are AP that you set before, it
will list all the AP in this field.

TCP/IP Setting

The TCP/IP Setting is to configure the parameters setting to the LAN
which connects with the Access Point, you may change the setting of
IP Address, Subnet Mask and Default Gateway.
Enable the function of DHCP Client to let the Access Point have an IP
Address automatically assignment by the DHCP server.

Statistics

This screen shows the packet counters for transmission and reception
on both Wireless LAN and Ethernet LAN.
19

Upgrade Firmware

By upgrading a new firmware for the Access Point to improve
functionality and performance. Enter the path and name of the upgrade
file then click the Upload button below. You will be prompted to
confirm the upgrade.
Note: Do not turn off the power during uploading, it may cause the system
crash.
20