TRENDnet TEW-453APB - 108Mbps Wireless Super G HotSpot Access Point Specifications

FEATURES
• No power needed, power provided by the networked PoE Ethernet cable
• Power over Ethernet (PoE) IEEE 802.3af support
• Wi-Fi Compliant with IEEE 802.11g / 802.11b Wireless Devices
• One 2dBi Detachable Antenna with Reverse SMA Connector
• High-Speed Wireless Access Point with up to 108Mbps Connection
• Supports Access Point, AP Client/Repeater and Bridge (PTP or PTMP up to 8 units) Modes
• 64/128/152-bit Wired Equivalent Privacy (WEP) with HEX or ASCII key
• Supports WPA/WPA-PSK, AES and TKIP
• Allows 802.1x and Non-802.1x Clients Running Simultaneously
• Supports 802.1Q Tag VLAN, allowing traffic from different sources to be segmented
• Supports Radius-based MAC address authentication and MAC Address Filter
• Supports Client to Client Communication Prevention per ESSID, Wireless Separation
• Multiple Security Profiles (max active 4), SSID Isolation and UAM (Universal Access Method)
• Supports Wireless Separations (between clients)and Worldwide Wireless Mode (802.11d) Standard
• Detects Rogue Access Points with Logs
• Easy Configuration with Web Browser (HTTP/HTTPS) or Telnet
• Flash Memory for Firmware Upgrade
• Range for 802.11b: up to 35~60 meters indoor, 300 meters outdoor (depends on the environment)
• Range for 802.11g: up to 20 meters indoor, 50 meters outdoor (depends on the environment)
• 3 Year limited Warranty
Note: Coverage and Speed performance might vary depending on the network environment.
108Mbps 802. 1 1g Hot-Spot Access Point
TEW-453APB
The TEW-453APB is a 108Mbps high speed 802.11g Wireless
Access Point that offers advanced wireless security, network
management, and Power-over-Ethernet capabilities.
security features include TKIP and AES algorithms for WPA, and
also Radius based MAC authentication.
management include VLAN, SNMP support, System log support,
and Rogue AP for extra security.
wireless
Wireless
Features for network
TEW-453APB
rev: 11.05.2008