4. Use the "Connect" command to start the connection.
5. You will be prompted for a user name and password.
Enter the current user name and password for the AP you are connecting to.
The default values are admin for the User Name, and password for the Password.
6. You will then see the prompt, and can then use any of the commands listed in the follow-
ing Command Reference.
Command Reference
The following commands are available.
?
admin
config wlan
config profile
del acl
del key
find bss
find channel
find all
format
bootrom
Figure 70: CLI Port Settings
Display CLI Command List
Temporary factory admin
config wlanX
config profile
Delete Access Control List
Delete Encryption key
Find BSS
Find Available Channel
Find All BSS
Format flash filesytem
Update boot rom image
Appendix E - Command Line Interface
97