Playing In A Denon Original Surround Mode; Direct Playback; Stereo Playback; Playing The Pure Direct Mode - Denon AVR-1910 Owner's Manual

Selecting the Surround Mode
w Playing in a DENON original surround
mode
The desired mode according to the program source and viewing
situation can be selected from among 7 DENON original surround
modes.
1
Select the input source by pressing
and play the source (vpage
37).
2
Press
to select the Surround
mode.
5CH/7CH STEREO ： This mode is for enjoying stereo sound from all
speakers.
ROCK ARENA ： This mode is for enjoying the atmosphere of a
live concert in an arena.
JAZZ CLUB ： This mode is for enjoying the atmosphere of a
live concert in a jazz club.
MONO MOVIE ： This mode is for playing monaural movie
sources with surround sound. z1
VIDEO GAME ： This mode is suited for achieving surround
sound with video games.
MATRIX ： This mode lets you add a sense of expansion
to stereo music sources.
VIRTUAL ： This mode is for enjoying surround effects
using only the front speakers or headphones.
z1： When playing sources recorded in monaural in the MONO
MOVIE mode, the sound will be off balance with a single
channel (left or right), so input to both channels.
Depending on the program source being played, it may not be possible
to achieve a satisfactory surround effect. In this case, try other modes
to achieve a sound field suited to your tastes.
NOTE
When the input signal is DOLBY TrueHD, DOLBY DIGITAL Plus,DTSHD
you cannot select DENON original surround mode.
e Direct Playback
In this mode the signals bypass the tone adjustment circuitry for
high quality sound.
The sound is output to the same channels as the input signal.
1
Select the input source by pressing
and play the source (vpage
Front
37).
2
Press to select the "DIRECT".
Rear
Displaying the currently playing surround mode
Input signal
Analog signal /
PCM (2ch) /
Dolby Digital source /
DTS source /
Other 2-channel digital signals
PCM (multi ch)
r Stereo Playback
This is the mode for playing in stereo. The tone can be adjusted.
Sound is output from the front left and right speakers and
subwoofer.
1
Front
Select the input source by pressing
37).
2
Press to select the "STEREO".
Rear
t Playing the Pure Direct mode
The indication contents of the
display
This is the mode that recreates the original sound most faithfully,
providing extremely high quality sound.
DIRECT
1
Select the input source by pressing
MULTI CH DIRECT
37).
M DIRECT + PLgx CINEMA
M DIRECT + PLgx MUSIC
2
M DIRECT + PLgz
Press .
M DIRECT 7 .1
• To cancel, press
• The channel level and surround parameters in the PURE DIRECT
mode are the same as in the DIRECT mode.
NOTE
When in the PURE DIRECT mode, the on-screen display is not
displayed and the display on the main unit is turned off.
Selecting the Surround Mode
and play the source (vpage
and play the source (vpage
again.
ENGLISH
Front
Rear
Front
Rear