Figure 42. Edit Page Destination - Dell 3250 Product Manual

After completing this screen, click Next to move to the next screen to continue this subtask. To
configure or modify the settings for a page destination, select a radio button next to the entry and
then click the Edit button to display the Edit Page Destination screen.
Enable Paging
This check box enables paging for the serial/modem channel.
Page Blackout Interval
The Page Blackout Interval determines the minimum number of minutes between pages. It
provides a way to prevent back-to-back pages if a rapid series of events occurs. This parameter is
entered in minutes; a value of 0 indicates no blackout.
Enter a value between 0 and 255.
Call Retry Interval
This setting gives the number of seconds between call retries when a busy signal is detected.
Enter a value between 0 and 255.
Edit Page Destination
When you select a Dial String on the Page Destination Configuration screen and then click Edit,
you are shown the Edit Page Destination screen. On this screen shown in Figure 42, you
configure or modify the settings for the selected page destination.
After completing this screen, click OK to return to the Page Destination Configuration screen.
Dial String
This drop-down list shows all destination dial strings. The string selected before you clicked Edit
on the Page Destination Configuration screen is displayed.

Figure 42. Edit Page Destination

117