Figure 34. Edit Event Filter Settings - Dell 3250 Product Manual

Edit Event Filter Settings
The screen shown in Figure 34 is displayed after the Edit button is clicked on the Event Filters
Settings screen.
After completing this screen, click OK to return to the Event Filter Setting screen.
Enable Event Filter
The Enable Event Filter enables / disables the selected filter. The filter is enabled when the box is
checked.
Enable Alerts
This check box causes an alert to be sent when an event associated with the selected event filter
occurs. If the box is not checked, or if the global enable for alerts is not enabled, no alert is sent.
Policy Number Associated With This Event Filter
This drop-down box allows you to specify an alert policy number to be associated with the event
filter. This setting is enabled only if the Enable Alerts box is checked; a valid policy number must
be chosen if alerts are enabled.
The drop-down list shows the valid policy numbers, between 1 and 15. You will assign policy
numbers to policy table entries when you click the Configure Policies button.
Chassis Action Associated With This Event Filter
This drop-down box allows you to select the chassis action that is associated with the selected event
filter. Chassis actions include power down, power cycle, reset, diagnostic interrupt, and none. For
any chassis action to occur, it must be globally enabled on the Platform Event Filter
Configuration screen.

Figure 34. Edit Event Filter Settings

105