To edit a policy, click in the radio button next to the item and then click Edit to display the Edit
Alert Policy Entry screen. After configuring the Alert Policy information, click Save to complete
this subtask.
Edit Alert Policy Entry
When you select an alert policy on the Alert Policy Configuration screen and then click the Edit
button, you will see the Edit Alert Policy Entry screen, as shown in Figure 36. Changes made on
this screen apply to the alert policy selected when you clicked Edit.
After you click OK on this screen, you are returned to the Alert Policy Configuration screen.
After completing this screen, click OK to return to the Alert Policy Configuration screen.
Enable Policy Entry
This check box enables / disables the selected policy table entry. If disabled, the firmware does not
look at that table entry when attempting to match entries to the event that occurred. This option is
enabled when the box is checked.
Policy Number
This edit box associates a policy number with a policy table entry. If the selected table entry is
already associated with a policy number, that policy number is displayed. If a policy number is not
associated with the selected table entry, 1 is displayed.
If alerts are associated with event filters, a valid policy number is required. Therefore, it is not
possible to select 0 as a policy number.
108
Figure 36. Edit Alert Policy Entry