Processor Module; Removing The Processor Module - Dell Precision M6300 User Manual

3 Tighten the four captive screws, labeled "1" through "4," in consecutive
order.

Processor Module

CAUTION:
the component covered by the following procedure. See your
Guide
for complete information about safety precautions, working inside the
computer, and protecting against electrostatic discharge.

Removing the Processor Module

CAUTION:
instructions in the
NOTICE:
grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
NOTICE:
the substrate on which the die is mounted while turning the cam screw to prevent
intermittent contact between the cam screw and processor.
NOTICE:
perpendicular to the processor when turning the cam screw.
NOTICE:
(see "Before Working Inside Your Computer" on page 180) before working inside the
computer.
1 Follow the instructions in "Before Working Inside Your Computer" on
page 180.
2 Remove the hinge cover (see "Removing the Hinge Cover" on page 197).
3 Remove the keyboard (see "Keyboard" on page 198).
4 Remove the display assembly (see "Removing the Display Assembly" on
page 200).
5 Remove the palm rest (see "Removing the Palm Rest" on page 217).
NOTICE:
To ensure maximum cooling for the processor, do not touch the heat
transfer areas on the processor thermal-cooling assembly. The oils in your skin
reduce the heat transfer capability of the thermal pads.
226
Adding and Replacing Parts
Only trained service technicians are authorized to
Before you begin the following procedure, follow the safety
Product Information Guide
To avoid electrostatic discharge, ground yourself by using a wrist
Do not touch the processor die. Press and hold the processor down on
To avoid damage to the processor, hold the screwdriver so that it is
To help prevent damage to the system board, remove the main battery
remove
Product Information
.
replace
or