1
1
smart card reader
3
smart-card reader connector on
system board
Replacing the Smart Card Reader
1 Carefully align the smart card reader over the smart card reader connector
on the system board and press it into place beneath the side notches.
2 Tighten the smart-card reader screw.
System Board
CAUTION:
the component covered by the following procedure. See your
Guide
for complete information about safety precautions, working inside the
computer, and protecting against electrostatic discharge.
Removing the System Board
CAUTION:
instructions in the
236
Adding and Replacing Parts
Only trained service technicians are authorized to
Before you begin the following procedure, follow the safety
Product Information Guide
2
2
smart-card reader screw
.
3
remove
replace
or
Product Information