Replacing The Palm Rest - Dell Precision M6300 User Manual

1
1 biometric reader connector
3 LED board connector
10 Disconnect the LED board connector.
11 Lift the palm rest and remove it from the computer.

Replacing the Palm Rest

1 Align the palm rest with the base and gently snap the palm rest into place.
2 Reconnect the touch-pad connector to the system board.
3 Reconnect the LED board connector to the system board.
4 Replace the coin-cell battery (see "Replacing the Coin-Cell Battery" on
page 215).
5 Replace the six M2.5 x 5-mm screws on the top side of the palm rest.
6 Turn the computer over, and replace the 12 M2.5 x 8-mm screws on the
bottom of the computer.
2
3
2 touch-pad connector
Adding and Replacing Parts
219