Removing the Display Panel
1
4
3
1
display panel
3
display back cover
CAUTION:
instructions in the
NOTICE:
grounding strap or by touching an unpainted metal surface on the computer.
1 Follow the instructions in "Before Working Inside Your Computer" on
page 180.
2 Remove the display assembly (see "Removing the Display Assembly" on
page 200).
3 Remove the display bezel (see "Removing the Display Bezel" on page 206).
4 Loosen the captive ground screw that attaches the display-panel ground
wire to the display back cover.
210
Adding and Replacing Parts
Before you begin the following procedure, follow the safety
Product Information Guide
To avoid electrostatic discharge, ground yourself by using a wrist
2
M2 x 3-mm screws (8)
4
grounding wire and captive screw
.
2