Dell Diagnostics Main Menu - Dell Precision M6300 User Manual

NOTE:
next start-up, the computer boots according to the devices specified in the
system setup program.
3 When the boot device list appears, highlight CD/DVD/CD-RW and press
<Enter>.
4 Select the Boot from CD-ROM option from the menu that appears and
press <Enter>.
5 Type 1 to start the Resource CD menu and press <Enter> to proceed.
6 Select Run the 32 Bit Dell Diagnostics from the numbered list. If
multiple versions are listed, select the version appropriate for your
computer.
7 When the Dell Diagnostics Main Menu appears, select the test you want
to run.

Dell Diagnostics Main Menu

1 After the Dell Diagnostics loads and the Main Menu screen appears, click
the button for the option you want.
NOTE:
It is recommended that you select Test System to run a complete test on
your computer.
Option
Test Memory
Test System
Exit
2 After you have selected the Test System option from the main menu, the
following menu appears:
NOTE:
It is recommended that you select Extended Test from the menu below to
run a more thorough check of devices in the computer.
Option
Express Test
The next steps change the boot sequence for one time only. On the
Function
Run the stand-alone memory test
Run System Diagnostics
Exit the Diagnostics
Function
Performs a quick test of devices in the
system. This typically can take 10 to 20
minutes.
Troubleshooting
141