3
2
1
1
system board connector
3
pull-tab
5
modem cable
NOTICE:
Replacing the Modem
1 Connect the modem cable to the modem.
NOTICE:
resistance, check the connectors and realign the card.
2 Align the modem with the screw holes and press the modem into the
connector on the system board.
3 Install the screws to secure the modem to the system board.
190
Adding and Replacing Parts
4
Do not disconnect the modem cable from the system board.
The connectors are keyed to ensure correct insertion. If you feel
5
2
M2 x 3-mm screw
4
modem