Processor Thermal-Cooling Assembly; Removing The Processor Thermal-Cooling Assembly - Dell Precision M6300 User Manual

5 Replace the display assembly (see "Replacing the Display Assembly" on
page 203).
6 Replace the keyboard (see "Keyboard" on page 198).
7 Replace the hinge cover (see "Replacing the Hinge Cover" on page 198).

Processor Thermal-Cooling Assembly

CAUTION:
the component covered by the following procedure. See your
Guide
for complete information about safety precautions, working inside the
computer, and protecting against electrostatic discharge.

Removing the Processor Thermal-Cooling Assembly

CAUTION:
instructions in the
NOTICE:
grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
NOTICE:
(see "Before Working Inside Your Computer" on page 180) before working inside the
computer.
1 Follow the instructions in "Before Working Inside Your Computer" on
page 180.
2 Remove the hinge cover (see "Removing the Hinge Cover" on page 197).
3 Remove the keyboard (see "Keyboard" on page 198).
4 Remove the display assembly (see "Removing the Display Assembly" on
page 200).
5 Remove the palm rest (see "Removing the Palm Rest" on page 217).
6 Loosen, in consecutive order, the four captive screws, labeled "1" through
"4," that secure the processor thermal-cooling assembly to the system
board.
7 Lift the processor thermal-cooling assembly and remove it from the system
board.
224
Adding and Replacing Parts
Only trained service technicians are authorized to
Before you begin the following procedure, follow the safety
Product Information Guide
To avoid electrostatic discharge, ground yourself by using a wrist
To help prevent damage to the system board, remove the main battery
remove
Product Information
.
replace
or