1
M2.5 x 5-mm screws (4)
3
tape
5
speaker cable
Replacing the Speakers
1 Connect the speaker cable connector to the connector on the system
board.
2 Align the speakers on the screw holes for securing the speakers to the
computer base.
3 Replace the four M2.5 x 5-mm screws to secure the speakers in place (two
on each speaker).
4 Re-route the speaker cables into the cable guides, and re-adhere the tape
to secure the speaker cables in place on the computer base.
USB Port Board
Removing the USB Port Board
CAUTION:
Before you begin the following procedure, follow the safety
instructions in the
1
Product Information Guide
3
2
6
2
cable guides
4
speakers (2)
6
connector or system board
.
Adding and Replacing Parts
5
4
221