DFL-M510
6. After two or three minutes the GUI opens on the DFL-M510 main screen.
7. To log out click the Close button
Running the Setup Wizard
The Setup Wizard helps you to quickly apply basic settings for the DFL-M510. You will need
the following information for your network to complete the Setup Wizard :
•
IP Address
•
Subnet Mask
•
Default Gateway
•
DNS Server
To run the Setup Wizard .
NOTE
10 -- Chapter 1: Getting Started with the DFL-M510
at the top-right of the screen.
The first time you log on to the DFL-M510, the Setup
Wizard starts automatically.