Windows Tcp/Ip Setup; Appendix 1 - D-Link DSA-3100 User Manual
Wireless service gateway
Hide thumbs
Also See for DSA-3100:
- User manual (87 pages) ,
- Manual (79 pages) ,
- Owner's manual (70 pages)
Table of Contents
Advertisement
DSA-3100 Wireless Service Gateway User Manual
Appendix 1
Windows TCP/IP Setup
If using the default DSA-3100 settings, and the default Windows 95/98/ME/2000 TCP/IP
settings, no changes need to be made. By default, the DSA-3100 will act as a DHCP Server,
automatically providing a suitable IP Address (and related information) to each PC when the
PC boots.
For all non-Server versions of Windows, the default TCP/IP setting is to act as a DHCP client.
If you wish to check your TCP/IP settings, the procedure is described in the following sections.
Checking TCP/IP Settings - Windows 9x/ME
1、Select Control Panel - Network. You should see a screen like the following.
2、Select the TCP/IP protocol for your network card.
46
Advertisement
Table of Contents
