Table of Contents
Advertisement
DFL-M510
Server Check
NOTE
SNMP C
ONFIGURATION
To set up SNMP (Simple Network Management Protocol), the SNMP communities have to be set
and access control to the SNMP server has to be enabled
Set Community
Get Community
Trap Community
Trap Server
26 -- Chapter 2: System
When the above fields are completed,
click Server Check to verify the mail
account.
The ID/Password field must be filled in if your mail
server requires authentication.
Type the SNMP community that allows the
SNMP set command. You can use SNMP
software to configure the device such as
System Contact, Name, Location.
Type the SNMP community that allows the
SNMP get command. You can use SNMP
software to retrieve configuration informa-
tion from the device such as System
description, Object ID, Up time, Name,
Location, and Service.
Type the SNMP community that allows the
SNMP trap command. When the device
reboots, the device sends the trap to the
trap server.
Type the IP of the SNMP management
center that should be reported.
.
Advertisement
Table of Contents
