Table of Contents
Advertisement
DFL-M510
Getting Started
Once you have accessed the Command Line Interface (CLI) with a terminal connection, press any
key and the following prompt will appear. Enter the user name and password: the default user
name is admin , the default password is admin .
Welcome to D-Link DFL-M510 Console Environment
Copyright (C) 2005 D-Link Corp. <www.dlink.com>
DFL-M510 login:
CLI Command List
You can use the console or SSH to connect the DFL-M510. After login, you can use the CLI com-
mands to configure the DFL-M510. The complete CLI commands are described as follows.
Commands
help
Getting information of all command's usage and argument configuration
get
Display all kinds of configuration information of the DFL-M510the DFL-
M510
set
Set the system paramter
history
Display all commands which you have used
exit
Exit command shell
reboot
Reboot system
reset
Reset system configuration to default settings, type "y" to load default
setting.
ping
Send ICMP echo request messages
Help Command
Help is used for getting information of other command's usage and argument configuration.
Main
Sub command
command
help
get
set
history
exit
reboot
reset
ping
E
XAMPLE
(A) help get
>> help get
get
- Get system parameters. Available commands
system
- System configurations, including IP, password and etc.
time
- Device clock setting
state
- Device operation state
interface
- Device interface configuration
106 -- Appendix A: The Command Line Interface
Description
Example
Command description
help get
Display all information of "get" command.
help set
Display all information of "set" command.
help history
Display all information of "help" command
help exit
Display all information of "exit" command
help reboot
Display all information of "reboot" command
help reset
Display all information of "reset" command
help ping
Display all information of "ping" command
Advertisement
Table of Contents
